Updating and deletion¶

Updating KubeVirt Control Plane¶

Zero downtime rolling updates are supported starting with release v0.17.0 onward. Updating from any release prior to the KubeVirt v0.17.0 release is not supported.

Note: Updating is only supported from N-1 to N release.

Updates are triggered one of two ways.

By changing the imageTag value in the KubeVirt CR's spec.

For example, updating from v0.17.0-alpha.1 to v0.17.0 is as simple as patching the KubeVirt CR with the imageTag: v0.17.0 value. From there the KubeVirt operator will begin the process of rolling out the new version of KubeVirt. Existing VM/VMIs will remain uninterrupted both during and after the update succeeds.
```
$ kubectl patch kv kubevirt -n kubevirt --type=json -p '[{ "op": "add", "path": "/spec/imageTag", "value": "v0.17.0" }]'
```
Or, by updating the kubevirt operator if no imageTag value is set.

When no imageTag value is set in the kubevirt CR, the system assumes that the version of KubeVirt is locked to the version of the operator. This means that updating the operator will result in the underlying KubeVirt installation being updated as well.
```
$ export RELEASE=v0.26.0
$ kubectl apply -f https://github.com/kubevirt/kubevirt/releases/download/${RELEASE}/kubevirt-operator.yaml
```

The first way provides a fine granular approach where you have full control over what version of KubeVirt is installed independently of what version of the KubeVirt operator you might be running. The second approach allows you to lock both the operator and operand to the same version.

Newer KubeVirt may require additional or extended RBAC rules. In this case, the #1 update method may fail, because the virt-operator present in the cluster doesn't have these RBAC rules itself. In this case, you need to update the virt-operator first, and then proceed to update kubevirt. See this issue for more details.

Updating KubeVirt Workloads¶

Workload updates are supported as an opt in feature starting with v0.39.0

By default, when KubeVirt is updated this only involves the control plane components. Any existing VirtualMachineInstance (VMI) workloads that are running before an update occurs remain 100% untouched. The workloads continue to run and are not interrupted as part of the default update process.

It's important to note that these VMI workloads do involve components such as libvirt, qemu, and virt-launcher, which can optionally be updated during the KubeVirt update process as well. However that requires opting in to having virt-operator perform automated actions on workloads.

Opting in to VMI updates involves configuring the workloadUpdateStrategy field on the KubeVirt CR. This field controls the methods virt-operator will use to when updating the VMI workload pods.

There are two methods supported.

LiveMigrate: Which results in VMIs being updated by live migrating the virtual machine guest into a new pod with all the updated components enabled.

Evict: Which results in the VMI's pod being shutdown. If the VMI is controlled by a higher level VirtualMachine object with runStrategy: always, then a new VMI will spin up in a new pod with updated components.

The least disruptive way to update VMI workloads is to use LiveMigrate. Any VMI workload that is not live migratable will be left untouched. If live migration is not enabled in the cluster, then the only option available for virt-operator managed VMI updates is the Evict method.

Example: Enabling VMI workload updates via LiveMigration

apiVersion: kubevirt.io/v1
kind: KubeVirt
metadata:
  name: kubevirt
  namespace: kubevirt
spec:
  imagePullPolicy: IfNotPresent
  workloadUpdateStrategy:
    workloadUpdateMethods:
      - LiveMigrate

Example: Enabling VMI workload updates via Evict with batch tunings

The batch tunings allow configuring how quickly VMI's are evicted. In large clusters, it's desirable to ensure that VMI's are evicted in batches in order to distribute load.

apiVersion: kubevirt.io/v1
kind: KubeVirt
metadata:
  name: kubevirt
  namespace: kubevirt
spec:
  imagePullPolicy: IfNotPresent
  workloadUpdateStrategy:
    workloadUpdateMethods:
      - Evict
    batchEvictionSize: 10
    batchEvictionInterval: "1m"

Example: Enabling VMI workload updates with both LiveMigrate and Evict

When both LiveMigrate and Evict are specified, then any workloads which are live migratable will be guaranteed to be live migrated. Only workloads which are not live migratable will be evicted.

apiVersion: kubevirt.io/v1
kind: KubeVirt
metadata:
  name: kubevirt
  namespace: kubevirt
spec:
  imagePullPolicy: IfNotPresent
  workloadUpdateStrategy:
    workloadUpdateMethods:
      - LiveMigrate
      - Evict
    batchEvictionSize: 10
    batchEvictionInterval: "1m"

Deleting KubeVirt¶

To delete the KubeVirt you should first to delete KubeVirt custom resource and then delete the KubeVirt operator.

$ export RELEASE=v0.17.0
$ kubectl delete -n kubevirt kubevirt kubevirt --wait=true # --wait=true should anyway be default
$ kubectl delete apiservices v1.subresources.kubevirt.io # this needs to be deleted to avoid stuck terminating namespaces
$ kubectl delete mutatingwebhookconfigurations virt-api-mutator # not blocking but would be left over
$ kubectl delete validatingwebhookconfigurations virt-operator-validator # not blocking but would be left over
$ kubectl delete validatingwebhookconfigurations virt-api-validator # not blocking but would be left over
$ kubectl delete -f https://github.com/kubevirt/kubevirt/releases/download/${RELEASE}/kubevirt-operator.yaml --wait=false

Note: If by mistake you deleted the operator first, the KV custom resource will get stuck in the Terminating state, to fix it, delete manually finalizer from the resource.

Note: The apiservice and the webhookconfigurations need to be deleted manually due to a bug.
$ kubectl -n kubevirt patch kv kubevirt --type=json -p '[{ "op": "remove", "path": "/metadata/finalizers" }]'